Clarke DEVIL IRD40B Operation & Maintenance Instructions Manual Download Page 2

2

Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]

INTRODUCTION

Thank you for choosing this Clarke Infrared Heater. Before attempting to use 
this product, please read this manual thoroughly and follow the instructions 
carefully. In doing so you will ensure the safety of yourself and that of others 
around you, and you can look forward to your heater giving you long and 
satisfactory service.

Please keep these instructions in a safe place for future reference.

FUNCTION AND OPERATING PARAMETERS

This is a multi-fuel (Diesel or Paraffin), forced air heater. It’s intended use is for 
drying and the warming of commercial/industrial buildings where adequate 
ventilation is provided.

• It must be operated as prescribed in the operating manual.

• It is not intended to be used for domestic use or for the heating of 

habitable areas. 

• It is not intended to be used to reach and maintain a certain level of 

human thermal comfort within an enclosed space in which the heater is 
situated.

• It is not intended to be used in enclosed areas with restricted ventilation.

• It is not for use in areas with high levels of fluctuating drafts. 

• It is not intended for warming animals or live stock.

GUARANTEE

This product is guaranteed against faulty manufacture for a period of 12 
months from the date of purchase. Please keep your receipt which will be 
required as proof of purchase. 

This guarantee is invalid if the product is found to have been abused or 
tampered with in any way, or not used for the purpose for which it was 
intended.

Faulty goods should be returned to their place of purchase, no product can 
be returned to us without prior permission.  This guarantee does not effect your 
statutory rights.

Summary of Contents for DEVIL IRD40B





















Reviews: