15
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
CLEANING AND MAINTENANCE
Before carrying out any adjustment or maintenance, ensure the heater is
switched OFF, disconnected from the mains supply, and has been given
adequate time to cool down.
CLEANING
1. Use a damp cloth wrung out in a solution of soapy water to clean the
exterior of the heater. Use household cleaners on difficult spots.
2. Never use abrasive cleaners as they may damage the paint finish.
3. The internal heating surfaces and combustion chamber of the burner
should be cleaned at least annually.
GENERAL MAINTENANCE
Correct maintenance is vital for smooth operation of the burner in order to
avoid wasting fuel and causing atmospheric pollution.
1. This heater should be inspected, cleaned and serviced annually by a
qualified service engineer. Unauthorised persons should not attempt to
carry out repairs of the burner components.
2. Replace the fuel filter cartridge if
water or dirt particles can be seen
in the glass filter bowl and at
approx 200 operating hours or as
needed.
WARNING: ALWAYS ENSURE THE HEATER HAS COOLED DOWN BEFORE
PERFORMING ANY MAINTENANCE TASKS
Summary of Contents for DEVIL IRD40B
Page 20: ......