10
MAINTENANCE
WARNING!
Make sure that the sander is switched off and disconnected from the
mains supply before starting any cleaning or maintenance procedures.
•
Keep the cooling vents clear.
•
Clean the housing with a soft cloth.
•
Any worn or damaged parts should be replaced by qualified personnel.
•
Keep the handles clean and free from oil and grease.
•
There are no user serviceable parts inside this sander.
TROUBLE SHOOTING
SANDER IS OVERHEATING
•
Clean the ventilation holes, and blow out with compressed air or clean
with a dry cloth.
•
Overloading the machine could cause overheating. Do not apply
excessive pressure.
SANDER DOES NOT OPERATE WHEN SWITCHED ON
•
Check to make sure that the fuse has not blown, if it has, replace the
fuse. If the fuse blows repeatedly, consult your CLARKE dealer.
•
If the fuse is OK and the machine still does not work, consult your CLARKE
dealer.
THE DUST IS NOT EXTRACTED
•
Dust extractor port is blocked.
