9
Dust
Extraction
Port
Fig 4
Fig 5
OPERATION
USING THE SANDER
1.
Make sure that there are no nails or other objects in the area to be sanded.
2.
Let the sander reach full speed before applying it to the work surface.
3.
Do not apply pressure to the sander during use. The weight of the sander
alone is sufficient for normal use.
4.
Move the sander evenly over the work area. Do not allow the sander to stay
in one place for too long.
5.
Replace worn sanding sheets. The performance of your sander is dependant
on the quality of the sanding sheets being used. Replacement sanding
sheets are available from your CLARKE dealer (see page 13).
6.
Remove the sander from the work area before releasing the trigger.
SANDING HINTS
•
Always use both hands to hold
the sander
•
Clamp the workpiece for
added stability and safety.
DUST EXTRACTION PORT
You can connect a vacuum cleaner
directly to the dust extraction port.
•
The extraction port has an
internal diameter of 30mm and
an external diameter of 37mm
