Clarke CONTRACTOR 6462072, Operation & Maintenance Instructions Manual

Page: 9 / 20

9
FITTING THE GUIDES
The tool is supplied with three guides,
• Parallel fence guide: primarily used for straight cuts, when
chamfering or grooving.
• Template guide: Fitted when the tool is used in conjunction with
templates.
• Trammel attachment: Used to move the router in an arc around a
selected pivot point.
FITTING THE PARALLEL GUIDE FENCE
1. Connect the rods (A) to the guide
body (C), securing with the screws
(D) provided.
2. Fit the assembled guide to the
router as shown on the right.
3. Secure using the parallel guide
locking screws (B).
The parallel guide allows the user to
follow a straight edge with accuracy.
It is always advisable to make a trial
cut in a piece similar to that to be worked where possible.
FITTING THE TEMPLATE GUIDE
The template guide allows the user to
duplicate a particular shape, that
shape being used as a template.
NOTE: The template guide can only
be used if the dust extraction
cover is fitted.
1. With the tool upside down,
remove the two screws securing
the dust extraction collar in place.
2. Fit the template guide with the
raised boss facing the workpiece.
3. Secure using the two screws.