Clarke CONTRACTOR 6462072, Operation & Maintenance Instructions Manual

Page: 5 / 20

5
6.
Dress properly.
Do not wear loose clothing or jewellery. Keep your hair, clothing
and gloves away from moving parts. Loose clothes, jewellery or long hair can be
caught in moving parts.
POWER TOOL USE AND CARE
1.
Do not force the power tool.
Use the correct power tool for your application. The
correct power tool will do the job better and safer at the rate which it was designed.
2.
Do not use the power tool if the switch does not turn it on and off.
Any power
tool that cannot be controlled with the switch is dangerous and must be repaired.
3.
Disconnect the plug from the power source before making any
adjustments, changing accessories, or storing power tools.
Such preventive
safety measures reduce the risk of starting the power tool accidentally.
4.
Store idle tools out of the reach of children and do not allow persons
unfamiliar with the power tool or these instructions to operate the power
tool.
Power tools are dangerous in the hands of untrained users.
5.
Maintain power tools
. Check for misalignment or binding of moving parts,
breakage of parts and any other condition that may affect the power tools
operation. If damaged, have the power tool repaired before use. Many accidents
are caused by poorly maintained power tools.
6.
Keep cutting tools sharp and clean.
Poorly maintained cutting tools with sharp
cutting edges are less likely to bind and are easier to control.
7.
Use the power tool, accessories and tool bits etc., in accordance with
these instructions
. Use of the power tool for operations different from intended
could result in a hazardous situation.
SERVICE
1.
Have your power tool serviced by a qualified repair person using only
identical replacement parts.
This will ensure that the safety of the power tool is
maintained.