18
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
45 DEGREE STOP ADJUSTMENT
1. Loosen the bevel clamp handle
and set the saw head as far to the
left as possible (this should be the
45° angle)
2. Place a 45° set square on the
table and up against the blade.
NOTE:
Do not touch the tips of the
blade teeth with the square.
3. Loosen the locking nut and turn
the 45° stop screw in or out until
the blade is at 45° to the table.
4. Re-tighten the locking nut.
5. If the bevel pointer does not
indicate zero on the bevel scale,
loosen the screw that secures the
pointer and move the pointer as
necessary.
Summary of Contents for CMS210S
Page 28: ......
