11
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
INSTRUCTIONS FOR USE
Always observe the safety instructions and applicable regulations.
BODY AND HAND POSITION
Proper positioning of your body and hands when operating the mitre saw will
make cutting easier and safer.
• Never place your hands near the cutting area or blade.
• Hold the workpiece tightly to the table and the fence when cutting.
• Keep your hands in position until the trigger switch has been released
and the blade has completely stopped.
• Do not cross your hands.
FRONT HANDLE
Rotate the front handle into position
as shown.
When the handle is out and inline
with the saw blade lift it to lock it into
place.
SWITCHING ON AND OFF
1. To start the saw, squeeze the
trigger switch.
• Allow the motor to reach full
speed before cutting.
2. To stop the saw, release the
trigger switch.
NOTE:
The main handle will get
warm to the touch when the
saw is connected to the mains supply, this is to be expected and does
not indicate a fault.
WARNING: THE BLADE WILL CONTINUE TO ROTATE AFTER THE SWITCH HAS
BEEN RELEASED.
Summary of Contents for CMS210S
Page 28: ......
