13
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
PERFORMING A SLIDING CUT
The guide rail allows cutting larger workpieces up to 340 mm x 78 mm
1. Release the slide rail lock.
2. Grasp the operating handle and
press and hold the blade guard
release lever (1) to release the
head.
3. Squeeze the trigger switch (2) to
start the saw.
4. Plunge the saw head down
through the workpiece.
5. When the head is fully depressed,
slowly pull it across to complete
the cut.
6. After completing the cut, release
the trigger and wait for the saw
blade to come to a complete
standstill before returning the
head to its upper resting position.
MITRE CROSS-CUT
1. Release the table mitre lock and
move the arm left or right to the
required angle.
2. Lock in position by tightening the
table mitre lock.
• Always ensure that the table
mitre lock is securely tightened
before cutting.
NOTE:
When you mitre the end of a piece of wood with a small off-cut, place
the wood so that the off-cut is to the side of the blade with the greater
angle to the fence.
Summary of Contents for CMS210S
Page 28: ......
