21
3. Collet Set (MT3)
Part Number: 7610864
A set of 7 Collets for use with the HSS End
Mills:
Insert the appropriate Collet into the
spindle.
Insert the draw bolt, provided, into the
spindle, from the top and screw on to the
Collet a few turns.
Insert the appropriate Mill into the jaws of
the Collet, and tighten the draw bolt.
Hold the spindle by means of the tommy bar,
inserted in the hole in the side of the head,
and into the hole in the spindle.
To remove the Collet, unscrew the draw bolt
a few turns and tap its head with a mallet
to break the seal between the Collet and
spindle.
4. Quick Release Vice
Part Number: 7610868
‘T’ nuts are provided with the base machine
Maximum opening:
88mm
Effective Jaw size:
100x33mm
Summary of Contents for CMD300
