Please note that the details and specifications contained herein, are correct at the time of going to print. However, CLARKE
International reserve the right to change specifications at any time without prior notice.
7
Defreezing
The gun is ideal for speeding up the defreezing of water pipes, but take care
where plastic pipes are concerned and provide protection against heat damage
for paint or wall coverings where necessary.
Drying
Always maintain a minimum distance of 3cm between the end of the nozzle and
workpiece. This prevents the gun from overheating and the thermal overload
from cutting in. Should this occur however, switch OFF the gun, stand it on its base
carefully and allow it to cool down. The thermal switch will cut back in automatically
in due course.
MAINTENANCE
The tool is maintenance free, except to ensure the air vents are kept clean at all
times. If used in a dusty atmosphere, it may be necessary to clean the tool with
compressed air (at low pressure) from time to time.
SPECIFICATIONS
Power Supply
230V~ 50Hz 1Ph.
Fuse Rating
13Amps
Net Weight
0.8kg
Power Rating
I - 1000Watts;
II - 1500Watts
Output Temperature
I - 300°C
II - 500°C
Air Volume
I - 280L/min
II - 480L/min
This product conforms with the following directives:
73/23/EEC and 89/336/EEC
PARTS & SERVICE TEL: 020 8988 7400
or e-mail as follows:
PARTS: [email protected]
SERVICE: [email protected]
For Spare Parts and Service,please contact your nearest dealer,
or CLARKE International, on one of the following numbers.
