background image

11. Never allow the ventilation slots in the machine to become blocked.

12. Be aware that fumes given off by paint etc., COULD be toxic. Take ALL

necessary precautions - consult paint manufacturer etc. where necessary.

13. Take care not to drop the gun at any time as this could seriously damage the

heating elements.

14. Do not attempt any electrical repair yourself. Consult a qualified electrician,

or our Service Dept. on 0208 988 7400

Additionally, keep these instructions in a safe place for future reference.

 

    ELECTRICAL CONNECTIONS

This product is provided with a standard 13 amp, 230 volt (50Hz), BS 1363 plug, for
connection to a standard, domestic electrical supply. Should the plug need
changing at any time, ensure that a plug of identical specification is used.

WARNING: This appliance is Double Insulated.

The two wires in the mains lead should be wired up in accordance with the
following colour code:

Blue

--

Neutral

Brown

--

Live

Connect the BROWN coloured cord to the plug terminal marked a letter “L”

Connect the BLUE coloured cord to the plug terminal marked a letter “N”

If this appliance is fitted with a plug which is moulded on to the electric cable (i.e.
non-rewireable) please note:

1.

The plug must be thrown away if it is cut from the electric cable. There is a
danger of electric shock if it is subsequently inserted into a socket outlet.

2.

Never use the plug without the fuse cover fitted.

3.

Should you wish to replace a detachable fuse carrier, ensure that the correct
replacement is used (as indicated by marking or colour code).

4.

Replacement fuse covers can be obtained from your local dealer or most
electrical stockists.

FUSE RATING

The fuse in the plug must be replaced with one of the same rating (

13 amps

) and

this replacement must be ASTA approved to BS1362.

If in doubt, consult a qualified electrician. Do not attempt any electrical repairs
yourself.

CABLE EXTENSION.

Do not use an extension longer than 10 metres

5

Summary of Contents for CHG 1500B








Reviews: