background image

Safety Precautions

WARNING!

Compressed air can be dangerous.

Follow these safety instructions carefully.

Never direct a jet of compressed air at people or animals, or spray
paint towards people or animals.

Use appropriate protective equipment, such as Clarke

safetygoggles or glasses, dust masks, ear defenders etc. when
using compressed air tools.

Air compressors work at high pressure. Inspect equipment and hoses
regularly, checking for any damage or leaks. Have any damage
properly repaired before using the machine again.

Do not operate the compressor with any guards removed.

Do not adjust or tamper with the safety valve in any way. The maximum
working pressure (115 psi - approximately approximately 8 bar) is clearly
marked on the compressor and air receiver.

The compressor will become hot during operation. Do not touch the
cylinder head or discharge pipe while the compressor is in use.

Always close the air outlet valve and release any pressure from the air
hose (by operating the tool briefly) before disconnecting any hoses

or tools.

When paint spraying:

Always wear a suitably approved breathing mask when paint
spraying, to protect against inhalation of paint spray or fumes.

An airfeed mask may be required when spraying some types of paint.
If in doubt, check the paint manufacturers instructions.

Make sure there is adequate ventilation. Do not spray in confined or
enclosed areas.

Many paints are flammable. Do not smoke while spraying or preparing
paints, or spray near a naked flame or heat source.

3

1

4

FN014002021

2

1

FN016055040

3

1

FN116055043

4

1

FN317050000

5

1

FN010102000

6

6

FN014013021

7

1

FN116117020

8

1

FN116117002

9

1

FN116022100

10

1

FN116022010

11

1

FN116093002

12

1

FN010127000

13

2

FN014011064

14

1

FN216022002

15

1

FN116022004

16

1

FN116022040

17

2

FN015001000

18

1

FN416022004

19

1

FN116091021

20

1

FN012043000

21

1

FN016091002

22

1

FN010072000

23

1

FN014013024

24

1

FN116091011

25

1

FN116093003

26

1

FN116091001

27

2

FN014003002

28

1

FN008030000

29

1

FN009200035

30

1

FN033027000

31

1

FN116093005

32

1

FN416093601

33

1

FN033005000

34

1

FN116011002

35

2

FN116011038

36

1

FN116001003

37

2

FN014006121

38

1

FN116117015

39

1

FN010029000

40

1

FN216HZ0001

Parts List and Diagram  (262)

10

 Item Qty

Part No.

Summary of Contents for CHAMP 262













Reviews: