26
SWITCHING FUNCTIONS
When preparing to measure voltage, push down the
“FUNC”
button to switch between DC and
AC. Push the
“FUNC”
button when preparing to measure Resistance, Diode, and Continuity, to
switch between them.
SWITCHING BETWEEN AUTO & MANUAL RANGE
When the Mode Selector is set to Voltage “
” or Resistance “
Ω
” mode
“AUTO RANGE”
is
the default setting for the tool. Push the
RANGE
button if you want to switch to
“MANUAL
RANGE.”
Each time you push the
RANGE
button, the measurement range will go up (Note the
position of the decimal point in the LCD Display). The meter will return to the Minimum Range if
the range button is pressed while at maximum range. Hold the
RANGE
button for two full seconds
to return to
AUTO RANGE
.
Summary of Contents for CDM80
Page 1: ...CDM80 PEN PROBE DIGITAL MULTIMETER OPERATING MANUAL Model CDM80 Part No 4500085...
Page 51: ...51 NOTES...
Page 52: ......
