Clarke CCM125C, Assembly & Maintenance Instructions

Page: 5 / 16

5
ELECTRICAL CONNECTIONS
CCM125C
Connect the power lead to a standard 230 Volt (50Hz) electrical supply
through an approved BS1363, 13amp plug or a suitably fused isolator switch.
CCM126
Connect the power lead to a suitable 110 Volt (50Hz) electrical supply
through an approved plug or a suitably fused isolator switch. If using a
portable 110 Volt transformer make sure it has a rated capacity sufficient to
take the load of the motor - See Data Plate.
Both models:
We recommend that this machine is connected to the mains supply through
a Residual Current Device (RCD).
WARNING! THIS APPLIANCE MUST BE EARTHED
IMPORTANT: The wires in the mains lead are coloured in accordance with the
following code:
Green & Yellow - Earth
Blue - Neutral
Brown - Live
As the colours of the flexible cord of this appliance may not correspond with
the coloured markings identifying terminals in your plug proceed as follows:
• Connect GREEN & YELLOW wire to terminal marked with a letter “E” or
Earth symbol “ ” or coloured GREEN or GREEN & YELLOW.
• Connect BROWN wire to terminal marked with a letter ‘L’ or coloured RED.
• Connect BLUE wire to terminal marked with a letter ’N’ or coloured BLACK.
CCM125C
If this appliance is fitted with a plug which is moulded onto the electric cable (i.e.
non- rewirable) please note:
1. The plug must be thrown away if cut from the electric cable. There is a
danger of electric shock if it is subsequently inserted into a socket.
2. Never use the plug without the fuse cover fitted.
3. Should you wish to replace a detachable fuse carrier, ensure that the
correct replacement is used (as indicated by marking or colour code).
Replacement fuse covers can be obtained from your local dealer or most
electrical stockists.
4. The fuse in the plug must be replaced with one of the same rating
(13amps) and this replacement must be ASTA approved to BS1362.
If in doubt, consult a qualified electrician....DO NOT attempt repairs yourself.