Clarke CCM125C, Assembly & Maintenance Instructions

Page: 4 / 16

4
GENERAL SAFETY PRECAUTIONS
1. ALWAYS Keep the work area clean and well lit. Floors should always be kept
clear. Cluttered or dark areas invite accidents.
2. ALWAYS keep children and bystanders away while operating a power tool.
Distractions can cause loss of control.
3. ALWAYS stay alert & do not use a machine while you are tired or under the
influence of medication or alcohol.
4. ALWAYS wear suitable protective clothing and eye protection including
industrial gloves, ear defenders & approved impact resistant safety glasses.
(Eye glasses are NOT safety glasses)
5. NEVER over-reach. Keep your proper footing and balance at all times to
enable better control of the machine in unexpected situations.
6. NEVER stand on the machine. Injury could occur from a fall.
7. ALWAYS store machines out of reach of children.
8. ALWAYS read and become familiar with the entire operating manual.
9. NEVER allow persons unfamiliar with this manual to operate this machine.
10. ALWAYS maintain the machine with care and keep it clean for best / safest
performance.
11. NEVER use this machine if any part is damaged. Have it inspected and
repaired by a competent technician.
12. NEVER modify this machine in any way. Use it ONLY for the purpose for which
it is designed.
13. ALWAYS keep guards in place when the machine is in operation.
14. ALWAYS ensure the electrical cable is fully protected and there is no danger
of damage from equipment or materials. Always Inspect the cable before
use and replace if any damage is apparent.
15. ALWAYS disconnect the machine from the power supply when not in use,
and before carrying out any maintenance.
16. NEVER leave the machine running unattended or leave machine until it
comes to a complete stop.
17. ALWAYS keep your hands well clear of the rotating drum at all times. NEVER
put your hands inside the drum when the machine is switched ON.
18. NEVER wear jewellery or loose clothing that could be snagged by any part
of the rotating drum.
19. NEVER load the drum when the machine is switched off. Always switch on
and ensure the drum is rotating.
20. ALWAYS have power tools serviced by your CLARKE dealer, using only identical
replacement parts. This will ensure the safety of the machine is maintained.