Clarke CBG6RP, Operating & Maintenance Instructions

Page: 6 / 12

ELECTRICAL CONNECTIONS
Connect the mains lead to a standard, 240 volt (50Hz) electrical supply through a
fused good quality (rubber preferred)13 amp BS 1363 plug, or a suitable fused
isolator switch.
WARNING: THIS APPLIANCE MUST BE EARTHED
IMPORTANT: The wires in the mains lead are coloured in accordance with the
following code:
Green & Yellow - Earth
Blue - Neutral
Brown - Live
As the colours of the flexible cord of this appliance may not correspond with the
coloured markings identifying terminals in your plug, proceed as follows:
•
Connect GREEN & YELLOW cord to terminal marked with a letter “E” or Earth
symbol ‘ ’ or coloured GREEN or GREEN & YELLOW.
• Connect BROWN cord to terminal marked letter “L” or coloured RED.
• Connect BLUE cord to terminal marked letter “N” or coloured BLACK.
We strongly recommend that this unit is fitted with a Residual Current Device (RCD).
FUSE RATING
The fuse in the plug for this appliance must be rated at 5 amps.
IMPORTANT NOTICE
If this appliance is fitted with a plug which is moulded onto the electric cable (i.e.
non rewirable) please note:
1. This plug must be thrown away if it is cut from the electric cable. There is a
danger of electric shock if it is subsequently inserted in a socket outlet.
2. Never use the plug without the fuse cover fitted.
3. Should you wish to replace a detachable fuse carrier, ensure that the correct
re-placement is used (as indicated by marking or colour code).
4. Replacement fuse covers can be obtained from your local dealer, an
electrical stockist, or CLARKE INTERNATIONAL Spare Parts Department
5. The fuse in the plug must be replaced with one of the same rating and this
replacement must be ASTA approved to BS1362.
5