Clarke CBG6RP, Operating & Maintenance Instructions

Page: 5 / 12

PRE-ASSEMBLY CHECK
Before assembling your Bench Grinder, please check to ensure that all the parts,
shown below, have been included.
Note: if any parts are missing or damaged, please contact your local dealer or
Clarke International for replacement.
1. Main Body (A) - switch and power cable with plug are included.
2. Two Eye Shields (B) , each complete with:
1 x nut,
1 x bolt,
1 x spring washer
2 x flat washers.
3. Two Spark Arrestor brackets (C) , each complete with:
1 x screw,
1 x spring washer
1 x flat washer.
4. Two Tool Rests (D) - Left and Right hand , each complete with:
2 x screws,
2 x spring washers
2 x flat washers.
4