8
MAINTENANCE
WARNING: DISCONNECT TOOL FROM AIR SUPPLY BEFORE CHANGING
ACCESSORIES, SERVICING OR PERFORMING MAINTENANCE. REPLACE
OR REPAIR DAMAGED PARTS. USE GENUINE CLARKE PARTS ONLY. NON-
AUTHORISED PARTS MAY BE DANGEROUS
1. Lubricate the air tool daily by placing a few drops of air tool oil into the air
inlet.
TROUBLESHOOTING.
Loss of power or erratic action may be due to the following:
a. Excessive usage on the air
line.
b. Moisture or restriction in the air
pipe.
c. Incorrect size or type of hose
connectors.
d. Grit or gum deposits in the
tool may also reduce
performance.
e. Check and clean the gauze
filter (located in the air inlet).
If the tool runs erratically or becomes inefficient, and the air supply is sound,
take the tool to your CLARKE dealer.
STORAGE
If the tool is to be stored, or is idle for longer than 24 hours, run a few drops of
Clarke air line oil into the air inlet, and run the tool for 5 seconds in order to
lubricate the internal parts.
1. When not in use, disconnect from air supply, clean tool and store in a safe,
dry place.
Gauze Filter
(located here)
