Clarke 7624007, Operation & Maintenance Instructions Manual

Page: 3 / 12

3
SAFETY PRECAUTIONS
THE JACK
1. The jack must be maintained and repaired in accordance with the these
instructions. Such maintenance and repair must be carried out by qualified
persons.
2. Ensure that the jack is in good working order. Have any damaged parts
repaired or replaced immediately. Use genuine Clarke parts only. The use
of unauthorised parts may be dangerous and will invalidate the
guarantee.
3. Do not exceed the rated capacity of the jack (4 tonne-scissor/5 tonne
cylinder).
4. Never tamper with the jack or modify it in any way, as this could prove to
be dangerous and will invalidate the guarantee. Only use the product for
the purpose for which it is intended.
5. Do not use the jack if an oil leak is apparent. Consult your Clarke dealer.
6. Check the condition of the labels regularly and replace as required.
WORKPLACE
1. Use the jack in a suitable, well lit work area.
2. Keep the work area clean and tidy and free from unrelated items.
3. Keep all non-essential persons at a safe distance whilst the jack is in use.
4. Use the jack on level and solid ground, preferably concrete. Avoid soft/
unmade ground as the jack may sink in.
5. Use appropriate safety equipment, such as protective footwear, when
using this jack.
OPERATION
1. Ensure the vehicle is securely supported.
2. Ensure there are no personnel or obstructions under the vehicle before
lowering.
3. Ensure when lifting, that the jack and all parts of the load can be clearly
seen. Always watch the jack and the load during operation.
WARNING: THE OPERATOR MUST FOLLOW ALL INSTRUCTIONS WITHIN THIS
INSTRUCTION MANUAL AND NOT OPERATE THE JACK UNTIL HAVING
DONE SO.