background image

 

www.combilift.com 

 

 
 

 
 
 
 
 
 

Dear Customer, 
 
Thank you for choosing us and showing your faith in the 
Combilift range of products. With this Combilift Product 
you now own a machine designed by our team of 
experienced engineers using the most up to date design 
techniques and technology with the sole aim of 
producing a machine that is efficient, reliable, safe and 
the right tool for your businesses material handling 
needs. The Combilift product possesses a vast range of 
multi-functional application possibilities that make it one 
of the leading products in the material handling industry.

 

 
   

 

 

 

 

Combilift Ltd 

 
  
 
 
This  Manual  contains  all  of  the  information  you  will 
require  to  operate  your  Combilift  product  safely  and 
efficiently. It is essential that this manual remain with the 
machine at all times. It is essential that the operator read 
this manual before attempting to operate the Combilift. 
 
Always  follow  all  safety  instructions  laid  out  in  this 
manual 
 
All  instructions,  prohibitive  or  otherwise,  found  in  this 
manual should be adhered to at all times. They are there 
to protect your life and the lives of others. 
 

Always  perform  the  Daily  Inspection  as  indicated  in 
this  manual  and  follow  the  guidelines  on  service 
intervals. 
 

Summary of Contents for C25000










































































Reviews: