20
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
MAINTENANCE
Your saw has been designed to operate over a long period of time with a
minimum of maintenance. Continuous satisfactory operation depends upon
proper tool care and regular cleaning.
Never use caustic agents to clean plastic parts.
1. Remove dust regularly from the machine. Cleaning is best carried out with
a fine brush.
2. Regularly clean the table top.
3. Regularly clean the dust collection outlet.
4. Use a half-round file where necessary to keep the teeth sharp. A blade that
is badly dulled or with damaged teeth should be replaced immediately.
CHANGING THE BLADE
1. Remove the transparent blade
guard.
2. Remove the table cover panel by
unscrewing the three securing
screws.
• The edge furthest from the
blade has a tongue and
groove joint with the table top.
WARNING: REMOVE THE PLUG FROM THE MAINS POWER SUPPLY BEFORE
CARRYING OUT ANY ADJUSTMENT OR MAINTENANCE.
WARNING: WEAR SAFETY GLOVES WHEN CHANGING THE SAW BLADE.
WARNING: THE REPLACEMENT BLADE MUST BE RATED TO AT LEAST 7000
RPM.
Summary of Contents for 6500752
Page 28: ......
