Clarke 6500685, Operating & Maintenance Instructions

Page: 7 / 32

Please check the carton contents carefully, if any parts are missing or damaged in any way, contact your
Clarke dealer immediately.
Ensure the lathe is secured firmly to a firm level surface...a sturdy workbench for example, or, if necessary, a
piece of 1/2” ply may be used, and this in turn should be clamped to a strong work surface when the lathe is
in use. The lathe may then be moved to a more convenient location for storage purposes. This is handy if
workspace is limited.
If a piece of ply is used, ensure the mounting screws are countersunk into the underside of the ply, so that the
bearing surface is completely flat.
UNPACKING AND CHECKING CONTENTS OF CARTON
7
OPTIONAL ACCESSORIES
A full range of optional accessories (detailed below) are available from your local dealer.
Accessory Part No
Cup Turning Chuck 6500641
Screw Chuck 6500642
4 Jaw Independent Lathe Chuck 6500645
6" Face Plat (Right Hand) 6500646
8 Piece Chisel Set 6500649
1. Tailstock Spindle
2. Toolrest Clamp Assembly
3. Tailstock
4 Faceplate
5. Tool Rest
6. Tailstock Advancing Handle
7. Drive Centre
8. Tailstock Clamp Assembly
9. Packet - 4 Nuts, bolts & Washers
10. Spanner
Not Shown - 3-Piece Chisel Set
CARTON CONTENTS
Fig.1