11
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
USING THE FLEXIBLE SHAFT ATTACHMENT
CONNECT THE FLEXIBLE SHAFT
1. Insert the flexible shaft into the
right side of the grinder as shown
and tighten the locking collar as
shown.
NOTE:
The locking collar has a left
hand thread
FITTING THE BITS
1. Insert the locking pin into the drill
head handle as shown.
2. Use the spanner supplied to loosen
the collet cover.
3. Insert the bit required.
4. Retighten the collet cover.
5. Remove the locking pin.
CHANGING COLLET
1. insert the locking pin into the drill
head handle as shown.
2. Use the spanner supplied to
remove the collet cover.
3. Replace the collet
4. Refit the collet cover
5. Remove the locking pin
ON / OFF - SPEED CONTROL
• Press (I) to turn the grinder on.
• Press (O) to turn the grinder off.
• Vary the speed using the speed
controller.
NOTE:
When grinding, set the speed
control to maximum to
prevent stalling.
Summary of Contents for 6500072
Page 16: ......
