14
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
PART LIST
NOTE:
Not all parts are available as a spare item.
MAINTENANCE
CLEANING
CHANGING THE CARBON BRUSHES
1. Remove the brush cover.
2. Remove the worn brush.
3. Replace with the new brush.
4. Repeat on the other side of the
body.
• Both brushes must be replaced
at the same time.
4
M10 Nut (left hand thread)
26
Toothed Washer
5
Flange
27
Right Tool Rest
6
Buffing wheel
31
Speed Dial controller
19
Grinding wheel
32
On/Off Switch
20
M10 Nut (right hand thread)
37
Baseplate
21
Shaft Coupler
38
Foot
23
Flexible Shaft attachment
41
Brush
24
Thumb Screw
42
Brush cap cover
25
Flat Washer
43
Left Tool Rest
11 + 44 - 48
Spark deflector/eye shield
assembly
WARNING: NEVER USE SOLVENTS OR OTHER HARSH CHEMICALS FOR
CLEANING THE TOOL. YOU SHOULD USE A CLOTH DAMPENED WITH
WATER AND MILD SOAP. NEVER LET ANY LIQUID GET INSIDE THE TOOL;
NEVER IMMERSE ANY PART OF THE TOOL INTO A LIQUID.
Summary of Contents for 6500072
Page 16: ......
