11
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
SWITCHING ON & OFF
1. Insert the plug into a mains power
socket.
2. Squeeze the trigger to start the
drill.
3. During use, press the trigger lock-
on button and the drill will run
continuously without you needing
to press the trigger.
4. Squeeze the trigger again briefly
to release the trigger lock & stop
the drill.
ADJUSTMENTS
FORWARD / REVERSE SELECTION
1. Set the forward/reverse lever to
the required setting.
SETTING THE SPEED
1. Turn the speed control dial to the
desired level.
NOTE:
The required setting is a
matter of experience.
• Set the dial to a low setting
when drilling into soft or brittle
materials.
• Set the dial to a higher setting when drilling in harder materials, .
CAUTION: THESE ADJUSTMENTS SHOULD ONLY BE PERFORMED WHEN
THE DRILL IS AT A COMPLETE STOP.
Summary of Contents for 6479510
Page 16: ......