9
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
HAMMER DRILL SELECTION
Slide the drill/hammer drill mode
selector switch to the ‘Hammer’
symbol on the drill body.
NORMAL DRILL SELECTION
Slide the drill/hammer drill mode
selector switch to the ‘Drill’ symbol on
the drill body.
NOTE: Both these actions should only
be performed when the drill is at a
complete stop.
FORWARD / REVERSE SELECTION
1. Set the forward/reverse selector
switch to the normal ‘Right Hand’
(forward) rotation for drilling holes.
2. Set the forward/reverse selector
switch to the opposite position for
‘Left Hand’ (reverse) rotation to
reverse the drill out of the
workpiece.
NOTE: This operation should only be
performed when the drill is at a
complete stop.
SPEED SELECTION
1. Turn the variable speed control in
the centre of the trigger until the
drill runs at your chosen speed.
2. The drill can be locked running by
pressing the lock-on button after
the trigger is squeezed.
3. To stop the drill, just squeeze the
trigger again.
Summary of Contents for 6479504
Page 16: ......
