19
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
CARBON BRUSHES
To maintain maximum efficiency of the motor, we recommend changing the
carbon brushes every 60 hours of operation.
To inspect or replace the carbon brushes:
1. Unscrew and remove the motor
cover on the right.
2. Carefully take out the two carbon
brushes using pliers and replace
with new brushes.
3. Replace the motor cover and
secure with the screws.
LUBRICATION
Your tool has been correctly lubricated and is ready to use. It is recommended
the gears be regreased with a gear lubricant at every carbon brush change.
BEARINGS
Bearings that become noisy (due to heavy load or abrasive material
damage) must be replaced by a qualified technician as soon as possible to
avoid overheating or motor failure.
Summary of Contents for 6462019
Page 24: ......
