10
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
SWITCHING ON/OFF
The planer has a trigger lock to
prevent accidental start-ups.
1. To turn the planer on, push the
trigger lock and then squeeze the
trigger switch.
2. To switch off, release the trigger
switch.
ADJUSTING THE DEPTH OF CUT
1. Rotate the depth adjustment
knob until the indicator arrow
aligns with the desired cutting
depth on the depth gauge.
• The minimum cutting increment
is 0.25 mm.
• The maximum cutting depth of
the planer is 3 mm.
NOTE:
For optimal performance, set the cutting depth to 0.5 mm and
make multiple cuts until you reach the depth required.
CAUTION: ALWAYS ENSURE THAT THE NUMBER ON THE DEPTH GAUGE IS
AT THE “0” POSITION WHEN THE PLANER IS NOT IN USE. HOWEVER, EVEN
AT “0”, A SLIGHTLY PROTRUSIVE BLADE COULD STILL MAKE CONTACT
DEPENDING ON HOW THE BLADE WAS INSTALLED. ENGAGE THE SAFETY
KICKSTAND TO PREVENT THE BLADE FROM TOUCHING THE WORKBENCH.
Summary of Contents for 6462019
Page 24: ......
