14
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
USING THE PARALLEL GUIDE FENCE
The parallel guide fence ensures that the planer travels parallel to the edge of
the wood, providing a straight cut at your desired cutting width. This feature is
helpful for planing door edges, wood trim and boards. To attach the parallel
guide fence:
1. Disconnect the planer from the power source.
2. Attach the parallel guide fence to
the left-hand side of the planer
using the lock knob.
3. Loosen the wing nut on the
parallel guide fence and slide the
fence to set the desired cutting
width indicated by the width
gauge. Retighten the wing nut.
NOTE:
To ensure a square cut,
measure the front and back
of the fence and use a
square to make sure the
guide is set straight.
4. Rest the front shoe flat on the
workpiece surface and position
the fence firmly against the edge
of the workpiece Follow
instructions on page 12 to perform
your cut.
Summary of Contents for 6462019
Page 24: ......
