7
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
INSTALLING THE CUTTING/WELDING NOZZLE (FIG 6, 7 & 8)
WELDING
Remove the cutting torch if fitted,
attach the welding nozzle adapter to
the welding torch/handle, tightening
hand tight only.
Select the required welding nozzle
and screw into the adapter. To
prevent the adaptor from turning,
hold in position with a 11mm open
ended spanner. Adjust the nozzle
position by turning to the desired position using an 11mm open ended
spanner on the nozzle connector.
CUTTING
Remove the welding nozzle and
nozzle adapter if fitted. Attach the
cutting torch to the welding torch/
handle, tighten the securing collar by
hand, ensuring the operating lever
does not foul on the valve knobs etc.
Remove the cutting nozzle securing
nut, select the required nozzle and
place into the securing nut. Screw
into the cutting torch and lock in
place using a 23mm open ended
spanner.
DO NOT
overtighten.
