2
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
INTRODUCTION
Thank you for purchasing this CLARKE Welding Kit.
Before attempting to use this product, please read this manual thoroughly and
follow the instructions carefully. In doing so you will ensure the safety of yourself
and that of others around you, and you can look forward to your purchase
giving you long and satisfactory service.
Please note, these instructions are designed to aid you in the basic principles
of welding, flame cutting, brazing, silver soldering, heating and the safe use of
gases, regulators and torches, they are NOT a definitive instruction manual.
With practice, a beginner can become proficient in the art of gas welding
and flame cutting. Once acquired, this skill will prove to be very useful and
possibly profitable.
GUARANTEE
This product is guaranteed against faulty manufacture for a period of 12
months from the date of purchase. Please keep your receipt which will be
required as proof of purchase.
This guarantee is invalid if the product is found to have been abused or
tampered with in any way, or not used for the purpose for which it was
intended.
Faulty goods should be returned to their place of purchase, no product can
be returned to us without prior permission. This guarantee does not effect your
statutory rights.
GENERAL SAFETY PRECAUTIONS
IMPORTANT: In addition to the following precautions, you should read, and
fully comply with, all instructions and safety precautions that were supplied
with your TIG Welder. Please keep these instructions in a safe place for
future reference.
1. NEVER point the torch at any person or animal.
2. NEVER touch the nozzle unless the welder is switched OFF and the nozzle
has been allowed to cool off.
3. NEVER connect, disconnect, or attempt to service the torch, unless the
welding machine is switched OFF and disconnected from the mains
supply..
