22
You can use the
[
▲
]
[
▼
] buttons to select an item and press
[ENTER], and the screen will display as shown below:
Press [ESC] to return to the Diagnostic Menu.
4.2.8 EVAP System Test
The EVAP test function lets you initiate a leak test for the vehicle
system. The AUTO SCANNER does not perform the leak test, but
signals to the vehicle function. Refer to the vehicle procedures
necessary to stop the test.
Select [EVAP System Test] and press [ENTER]. The screen will
display the relative information about the EVAP system. Some
vehicle manufacturers do not allow external devices to control the
vehicle system. If the car supports this function, it will display as
below:
4.2.9 Vehicle Info
Select [Vehicle Info] and press [ENTER]. The screen will display the
information, such as VIN (Vehicle identification Number), CID
(Calibration ID) and CVN (Calibration verification number), as shown
below:
Summary of Contents for 4501130
Page 1: ...EOBD ENGINE FAULT CODE READER Model No CEOBDPRO Part No 4501130 USER INSTRUCTIONS GC04 14...
Page 26: ......
Page 27: ...27 6 DECLARATION OF CONFORMITY...
Page 28: ......
