15
According to the above figure, press [ENTER] and the screen will
display the interface as shown on the next page:
Notes:
◆
Before performing this function, make sure to retrieve and record
the fault codes.
◆
After clearing, you should retrieve fault codes once more or turn
the ignition on and retrieve the codes again. If there are still some
fault codes in the system, please troubleshoot the code using a
factory diagnosis guide, then clear the code and recheck.
4.2.3 I/M Readiness
I/M readiness refers to ‘Inspection and Maintenance’ that is
legislated by the Government to meet Federal clean-air standards.
I/M Readiness indicates whether or not the various emissions-
related systems on the vehicle are operating properly and are ready
for Inspection and Maintenance testing.
The purpose of the I/M Readiness Monitor Status is to indicate
which of the vehicles described in Chapter 2.5), and verify which
ones have not yet run and completed testing and diagnosis of their
designated sections of the vehicle system.
The I/M Readiness Monitor Status function also can be used (after
repair of a fault has been performed) to confirm that the repair has
been performed correctly, and/or to check for Monitor Run Status.
Select [I/M Readiness] and press [ENTER], the screen will display
the interface as shown below:
Summary of Contents for 4501130
Page 1: ...EOBD ENGINE FAULT CODE READER Model No CEOBDPRO Part No 4501130 USER INSTRUCTIONS GC04 14...
Page 26: ......
Page 27: ...27 6 DECLARATION OF CONFORMITY...
Page 28: ......
