11
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
3. Disconnect the tube #4 from the connector #12 with a rubber mallet. Wrap
the door panel around the tube. Slip the webbing strap between the tubes
and then re-connect. Repeat for all the shoulders.
4. Hook the pre-assembled ratchet tie-down to the bent corner leg and
tighten the ratchet until the front door cover is reasonably tight.
5. Repeat the same procedure to install the back panel in position.
Summary of Contents for 3503578
Page 16: ......
