10
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
STEP 5: INSTALLING THE FRONT AND BACK COVERS
The front cover has a zippered door to allow entry to the garage. Be sure to
locate this cover at the desired end and ensure the zipper is in the closed
position while installing.
The back cover is a solid piece of polyethylene.
The covers are installed in the same fashion.
1. Thread the strap through the spindle of the ratchet to make sure the strap
will stay in the sleeve when assembled. Raise and lower the handle two or
three times to wind the strap onto the spindle as shown in diagram I-1 & I-2.
2. Begin with the front cover and first locate the webbing strap that runs
around the perimeter of the cover. The webbing remains exposed at the
peak, shoulders and feet of the cover.
Summary of Contents for 3503578
Page 16: ......
