Clark C40D, Operator'S Manual

Page: 53 / 140

Urea(SCR) System (C60-80D, Doosan Engine) 3-15
Section 3. Operator Compartment and Controls
IMPORTANT
Make sure that the urea solution meets the specifications
of ISO 22241 or DIN 70070.
2. Any foreign substance in the tank may cause the following issue:
−
Malfunction of the catalyst and emission purification system
−
Damage of the engine
IMPORTANT
Do NOT use the urea solution taken out of the tank for rea-
sons such as servicing the forklift as it may not have the
required purity - Use the new bottle only.
Cautions for using urea solution
WARNING
!
1. Make sure NOT to come into contact with the water from
the exhaust. The water from the catalyzing effect is
mildly acidic and may damage the skin. Rinse off imme-
diately if you come into contact with the water
2. The emission reduction system causes high heat, thus
make sure to work on the system after its surface is
completely cooled down. Otherwise you may suffer a
burn on the skin.
WARNING
!
1. Make sure to use the urea solution of the designated
specifications for the forklift with the SCR system.
2. Adding urea solution of poor quality or any liquid not
recommended herein may damage the forklift compo-
nents such as the emission reduction system. Also the
foreign substance in the unverified additive may block
the flow of the SCR catalyst and damage the system.
3. Rinse off the urea solution with clean water if it contacts
the eye.
4. Rinse your mouth with clean water and drink a lot of
water if you consumed any urea solution.
Also seek medical help immediately.
5. Immediately change into new clothes if the current ones
are stained with urea solution.