Clarity E814CC User Manual Download Page 50 | Manualshive

Page: 50 / 64

background image

50

using your CorDless HanDseT

add a sPeed diaL nUmber

1.  In idle mode, press <menU/seLect>, then <UP/down> to select Directory.
2.  Press <menU/seLect>, then <UP/down> to select Speed dial.
3.  Press <menU/seLect>, then <UP/down> to select an empty speed
  dial location.
4.  Press <menU/seLect> to access the directory list, then press <UP/down>
  to select the desired directory entry.
5.  Press <menU/seLect> to save. The name of the desired directory entry
  appears in the selected speed dial location.
note: If the directory is empty, when you press menU/seLect in step 4, the screen
shows directory emPty.
If the speed dial location you selected is occupied, the new directory entry you selected
replaces the old one. Take caution not to replace entries you do not wish to delete from
the speed dial locations.

Dial the speed Dial number
1.  In idle mode, press and hold a dial pad key (0 through 9) to display the desired speed
  dial entry. The handset automatically dials out the displayed number.
–OR–
2.  Press <taLK off/cLear> within one second to stop dialing the
  displayed number.
note: If the speed dial location you selected is empty, the screen shows the speed dial
list instead.

Delete the speed Dial number
1.  In idle mode, press <menU/seLect>, then <UP/down> to select Directory.
2.  Press <menU/seLect>, then <UP/down> to select Speed dial.
3.  Press <menU/seLect>, then <UP/down> to scroll to a speed dial location.
4.  Press <mUte/X> to delete the selected speed dial location. A confirmation
  tone sounds. Deleting speed dial locations does not affect entries in the directory.

«
...
48
49
50
51
52
...
»

Summary of Contents for E814CC

































































Reviews:

No comments

Related manuals for E814CC

Brand: Jacob Jensen Pages: 32

Brand: Yealink Pages: 2

Brand: Talkswitch Pages: 26

Brand: NEC Pages: 158

ElectraElite IPK

Brand: NEC Pages: 38

ELECTRA ELITE IPK II

Brand: NEC Pages: 56

Brand: NEC Pages: 8

Brand: NEC Pages: 8

Brand: Aastra Pages: 2

Brand: Uniden Pages: 49

Brand: AT&T Pages: 33

Brand: Uniden Pages: 48

Brand: JRC Pages: 110

Brand: OCL Pages: 2

Brand: Uniden Pages: 46

Brand: 2N Pages: 32

Brand: Panasonic Pages: 2

Brand: Uniden Pages: 13

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands