Clarity E814CC User Manual Download Page 23 | Manualshive

Page: 23 / 64

background image

23

4. Press the <oK/menU> button to confirm.
5. Display shows “Edit name”; key in the name using the digit keys (maximum 15

characters). If you make any mistakes, press <cLear/mUte> to backspace a
character. Press <UP> or <down> to insert characters.

6. When you have finished editing, press <oK/menU> to confirm, and the display
shows “Saved”, then it returns to the list of CID records.

Delete an entry in the CiD
1.  Follow steps from 1 to 3 in section View the CID.
2.  Press < X > to delete the record displayed on the screen. The record will be
  deleted immediately.

Delete all entries in the CiD
1.  Press <oK/menU> and <UP/down> to select Caller ID log; press
  <oK/menU>.
2.  Press <UP/down> to select Delete all calls; press <oK/menU>.
3.  Display shows “Delete all?” Press <oK/menU> to confirm, or
  <cLear/mUte> to canceL.

Phone settinGs

Your phone comes with a selection of settings that you can change to personalize your
phone the way you like it to work.

set Date and Time
The format for the date is MM-DD-YY, and the time is HH:MM in either 12-hour or
24-hour format.
1.  Press <oK/menU> and <UP/down> to select Set date/time.
2.  Press <oK/menU> to show Date: ; use numeric keypad to enter date
  (MM-DD-YY).
3.  Press <oK/menU> to confirm; display shows Time:; use numeric keypad to enter
  time (HH:MM), use .<UP/down> to set am/Pm.
4.  Press <oK/menU> to confirm and you will hear a beep, display returns to menu.

using your CorDeD Base

«
...
21
22
23
24
25
...
»

Summary of Contents for E814CC

































































Reviews:

No comments

Related manuals for E814CC

Brand: GE Pages: 96

Brand: D-Link Pages: 58

Brand: Uniden Pages: 51

EuroPhone Basic 10

Brand: HAGENUK Pages: 87

Brand: Topeak Pages: 2

Brand: LEGRAND Pages: 3

Brand: Clarity Pages: 26

Brand: Doro Pages: 72

Brand: SoftBank Pages: 307

Brand: Gigaset Pages: 74

Brand: Excelltel Pages: 20

Brand: Makita Pages: 36

Brand: Motorola Pages: 28

Brand: Motorola Pages: 32

Brand: Motorola Pages: 20

Brand: Motorola Pages: 28

Brand: Motorola Pages: 28

Brand: Motorola Pages: 40

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands