Clarity E814CC User Manual Download Page 36

Page: 36 / 64

1 rd/P (rediaL/PaUse)

• in idle mode: Press repeatedly to view the last numbers dialed.

• While entering numbers: Press and hold to insert a dialing pause (P).

2 boost

• During a call: Press to enhance the clarity and loudness of your

caller’s voice.

3 mUte / X (remove)

• During a call: Press to mute the microphone.

• While predialing: press to delete a digit.

• While reviewing the redial list, directory, speed dial list or

caller iD history:

Press to delete and individual entry.

• When ringing: Press to turn off the handset ringer temporarily.

4 voLUme UP / directory / scroLL UP

• in menu mode: Press to scroll up the menu items.

• During a call: Press to increase listening volume.

• in idle mode: Press to access the directory.

• While entering names or numbers in the directory: Press to

move the cursor to the right.

5 taLK off / cLear

• During a call: Press to end the call.

• While using menus: Press to cancel an operation, return to the

previous menu, or standby mode.

• in idle mode: Press and hold to erase the missed calls indicator.

• When ringing: Press to turn off the handset ringer temporarily.

6 voLUme down / caLL LoG / scroLL down

• in menu mode: Press to scroll down the menu items.

• During a call: Press to decrease listening volume.

• in idle mode: Press to access the call list.

• While entering names or numbers in the directory: Press to

move the cursor to the left.

geTTing To knoW your CorDless HanDseT

Summary of Contents for E814CC

































































Search results

Summary of Contents for E814CC

Reviews:

Related manuals for E814CC

Brands by name

Popular brands

Clarity E814CC, User Manual

Search results

Summary of Contents for E814CC

Reviews:

Related manuals for E814CC

Brands by name

Popular brands