Clarity E814CC, User Manual

Page: 21 / 64

21
4. Display shows “Entries in DIR” briefly, then displays the first entry in alphabetical
order; press <UP/down> to select the desired entry to be deleted.
5. Press < X > and display shows “Delete contact?”.
6. Press <oK/menU> to confirm or <cLear/mUte> to cancel.
assign speed Dials
Your corded base has 9 speed dial available, corresponding to keys “0, 2-9” on your
numeric dial pad. When these speed dial locations are set up, you can dial these numbers
by press-and-holding the numeric key. For example – to dial the number set up in speed
dial 4, press and hold key “4” for 2 seconds. To set up the speed dial buttons, you must
first add that number/contact to the directory.
In idle:
1. Press <oK/menU>, then <UP> or <down> to select Directory;
press <oK/menU> to enter the directory menU.
2. Press <UP/down> to see Speed dial.
3. Display shows the first speed dial location, 0; press <UP> or <down> to
see aLL avaiLabLe Locations. the avaiLabLe (not yet
set) Locations wiLL show <UnassiGned>; the set Loca-
tions wiLL show the name of the contact. Press <oK/
menU> to seLect a sPeed diaL Location.
4. Display shows “Copy from DIR”, followed by the first entry in your directory. Use
<UP> or <down> to select the entry you wish to assign to your speed dial
location; press <oK/menU> to seLect the entry.
5. You can further edit this entry if needed; press <oK/menU> to confirm.
6. You will hear a confirmation beep when finished, display returns to the Speed Dial list
of records.
note: You can reassign Speed Dial locations - follow steps above and choose the Speed Dial
you want to change; display shows “Reassigning SD”; press <oK/menU> to confirm.
note: Speed Dial “1” is reserved for Voicemail access (separate features, available from
your local phone service provider”. See section
Phone settinGs for setting up Voice-
mail speed dial and for directions on how to clear the voice mail icon.
using your CorDeD Base