PROCEDURE MANUAL
____________________________________________________________________________
Product Code: CD-BG1
Rev01.06042018
Page
11
of
20
9. Measurement Unit:
The glucose measurement unit is defaulted to "mg/dl "
.
Press the 'M'
Button to move on to turning the
"
Beeping" sound on or off
.
NOTICE:
This cannot be changed, if you have any questions concerning the Measurement Unit Type
contact Clarity Diagnostics Customer Service at 1-877-722-6339.
CAUTION:
- Use of the wrong unit of measure may cause you to misinterpret the blood glucose level, and
incorrect treatment.
-
Contact a healthcare professional if you have any questions about measuring units.
10. Turning the Beep Sound On or Off:
The meter has the Beep sound defaulted to "On"
.
To
turn the Beep sound off on the meter press the 'C' Button until "OFF" is displayed on the
screen, then press the 'M' Button to confirm and move to Deleting Your Test Results.
NOTICE:
Turning the Beep sound On or Off does not affect your glucose measurement.
11. Deleting Your Test Result:
Select the 'C' Button to toggle between "YES" and
"
NO
"
.
If you
want to keep your readings in the memory toggle to "NO" then select the 'M
'
Button to
confirm.
12.
If you want to delete all of the readings in the memory toggle to "YES" then select the 'M' Button to
confirm.
13.
After deleting, the screen will show as pictured above. Press the 'M' Button again and the meter will
turn off
.
Reviewing Test Results:
