Clarion VXZ766, Owner'S Manual

Page: 38 / 51

OPERATIONS
38
VXZ766
English
Adjusting the dynamic range
This function allows you to adjust the dynamic
range, the ratio of the loudest sounds to the
quietest sounds.
• The factory default setting is “
OFF ”.
1. Following the steps 1 to 3 in “ Selecting the
monitor menu ”, select “ DRC ” from “ AUDIO
SETUP ”.
2. Press “ ” button to go to the right pane.
3. Press “ ” or “ ” buttons to select the
setting. You can select the dynamic range
from “
ON ” or “ OFF ”.
4. Press the [ ENT ] button.
Setting the Dolby Pro Logic Decode
processing
You can set whether or not 2-channel source is
processed using Dolby Pro Logic Decode.
• The factory default setting is “
ON ”.
1. Following the steps 1 to 3 in “ Selecting the
monitor menu ”, select “ Dolby PL ” from
“ AUDIO SETUP ”.
2. Press “ ” button to go to the right pane.
3. Press “ ” or “ ” buttons to select “ ON ” or
“ OFF ”.
4. Press the [ ENT ] button.
Setting the down mix
This function allows you to select the method of
down-mixing when the channel format and the
output channel configuration are not in
agreement.
• This function can be operated only when the
speakers other than “ FRONT-SP ” are set to “ OFF ”
in “ SPEAKER-SEL ” (P. 36) .
• The factory default setting is
“
Lo/Ro ”.
1. Following the steps 1 to 3 in “ Selecting the
monitor menu ”, select “ DOWN MIX ” from
“ AUDIO SETUP ”.
2. Press “ ” button to go to the right pane.
3. Press “ ” or “ ” buttons to select “ Lo/Ro ”
or “ Lt/Rt ”.
“ Lo/Ro ”: Down-mixing the discrete 5-channel
master etc. to 2-channel stereo track
“
Lt/Rt ”: Writing down matrix-encoded sounds
to 2-channel stereo track
4. Press the [ ENT ] button.
A U D I O S E T U P
P R E S S E N T E R T O S E L E C T
C E N T E R - S P O N
D R C O F F
A U D I O S E T U P
P R E S S E N T E R T O S E L E C T
D o l b y P L
O F F
C E N T E R - S P O N
A U D I O S E T U P
P R E S S E N T E R T O S E L E C T
L t / R t
D O W N M I X
C E N T E R - S P O N
L o / R o
VXZ766.book Page 38 Monday, January 16, 2006 6:43 PM