manualshive.com logo in svg

Clarion UNGO ProSecurity SR5000, Owner'S Manual, Page: 29 / 52

Share
Download
Clarion UNGO ProSecurity SR5000 Owner'S Manual Download Page 29

26

silent arm/disarm

To temporarily turn off the arm or disarm chirps, use silent

arm/disarm. Simply press 

for less than one second before

arming or disarming, and the confirmation chirp(s) will be elim-

inated for that one operation only. When silent arm/disarm has

been used the silent arm/disarm mode icon will indicate silent

arm/disarm. If you want the arm/disarm chirps turned off

permanently, your dealer can do this for you.

note:

The warning response to lighter impacts is bypassed

if the system is armed using silent arm/disarm. This
ensures that no chirps will be emitted by the siren in an
area you want chirp-free. The system is still fully capable
of triggering. Only the warning response is bypassed.

➜

important!

The override switch can be programmed to

respond to 1-5 presses for the disarm function. You must
check with the installer to verify the programming for
your individual unit.

Summary of Contents for UNGO ProSecurity SR5000





















































Reviews:

No comments