Clarion Ungo Pro Security SR9000 Owner'S Manual Download Page 46

Page: 46 / 53

➤

Accttiivvee arming (transmitter only) or passive arming (auto-

matic arming 30 seconds after the last door has been closed).

➤

Arming/disarming siren chirps oon

n or off.

➤

The ignition controlled door lock feature oon

n or off: When

this feature is programmed on, the doors will lock three

seconds after the ignition is turned on, and unlock when the

ignition is turned off. If your installer is programming the

security system with the Ungo ProSecurity Programmer,

ignition lock and unlock are independent features that can

be programmed separately.

➤

Passive door locking (with passive arming) or aaccttiivvee d

doooorr

lloocckkiin

ngg (only when arming with the transmitter). Passive

locking allows the vehicle's doors to lock when the security

system passively arms (after the 30-second countdown). This

feature only works if passive arming has been programmed.

➤

Panic mode een

naab

blleed

d/disabled when the ignition is turned on.

(Some states have laws against sirens sounding in moving cars.)

➤

Forced passive arming oon

n or off. If your security system is

programmed for passive arming and the forced passive

arming feature has been programmed on, the system will

passively arm after one hour, even if a protected entry has

been left open. Forced passive arming ensures that the

system will be armed if a door has accidentally been left ajar

when leaving the vehicle.

Summary of Contents for Ungo Pro Security SR9000





















































Search results

Summary of Contents for Ungo Pro Security SR9000

Reviews:

Related manuals for Ungo Pro Security SR9000

Brands by name

Popular brands

Clarion Ungo Pro Security SR9000, Owner'S Manual

Search results

Summary of Contents for Ungo Pro Security SR9000

Reviews:

Related manuals for Ungo Pro Security SR9000

Brands by name

Popular brands