42
© 2 0 0 7 d i r e c t e d e l e c t r o n i c s
Sensor icon selection (hood/trunk)
Use
to toggle display selections between hood only (1 beep),
trunk only (2 beeps), or hood and trunk (3 beeps) on the LCD
display. The installer will have set the remote up to correctly
display the installation (hood pin only, trunk pin only, or hood
and trunk pin installed).
Page mode (On/Off)
Press
to toggle Page mode on and off. When Page Mode is
on, the remote control will wake up periodically to check for
messages from the security module. It will also wake up when
any button on the remote is pushed. When Page Mode is off, the
remote control “sleeps” until a button on the remote is pushed,
extending the life of the battery.
p
prro
og
grra
am
mm
miin
ng
g o
op
pttiio
on
nss
Programming options control your system's normal, operational
set-up. Most options do not require additional parts, but some
may require installation labor.
The following is a list of the programmable options, with the
factory settings in Bold.
note:
When page mode is Off, Warn Aways
®
and alarms
will not be displayed or notified on the remote until a
button on the remote has been pressed.
➜
➜
