30
2-5 OVERRIDE PULSE COUNT ONE TO FIVE PULSES:
The system can be programmed to count the number
presses of the valet button before disarming the security or Anti-Carjacking system. The factory default set-
ting is one pulse. The unit can be set for two to five pulses using the two-chirp setting to select the pulse count.
Hidden Switch Option: For added security, the GRAY wire on the two-pin Override switch can be con-
nected to any switch in the vehicle that provides a positive (+) momentary pulse.
2-6 OPEN ZONE NOTIFICATION ON/OFF:
when programmed on, any active zone input to the sys-
tem during arming will generate a open zone notification chirp. When programmed OFF, no notifica-
tion chirps will be generated if any zone is active during arming.
2-7 IGNITION-CONTROLLED DOMELIGHT SUPERVISION ON/OFF:
If turned on, the system will turn
on the domelight for 30 seconds when the ignition is turned off. The optional domelight supervision fea-
ture must be installed.
2-8 DOUBLE PULSE UNLOCK ON/OFF:
Some vehicles require two pulses on a single wire to unlock
the doors. When the double pulse unlock feature is turned on, the BLUE/BLACK H2/G wire will sup-
ply two pulses instead of a single pulse. This makes it possible to directly interface with double pulse
vehicles without any extra parts.
2-9 CHANNEL 3 VALIDITY/LATCHED/LATCHED RESET WITH IGNITION/30 SECOND TIMED/SECOND
UNLOCK OUTPUT:
Channel 3 can be programmed for these output configurations. The unit is set to the
default validity output. To change the configuration, use the two-chirp setting to toggle to the different
configurations.
remote coding
The system comes with two remotes that have been taught to it. The system can store up to four differ-
ent remote codes in memory. Use the following learn routine to add remotes to the system or to change
button assignments if desired.
If the system was previously programmed using the Pro Security Programmer, the learn routine may be
locked. If the siren generates one long chirp when attempting to program the unit, the learn routine is
locked and must be unlocked using the Pro Security Programmer before proceeding.
1. Open a door. (The GREEN wire, H1/5, or the VIOLET, H1/7 must be connected.)
2. Turn the ignition on. (The YELLOW wire, H1/9 must be connected.)
Summary of Contents for S400
Page 13: ...14 ...
Page 18: ...19 type G door lock system wiring diagram ...
Page 36: ...37 wiring quick reference guide ...
Page 37: ...38 ...
