Clarion S400, Install Manual

Page: 25 / 38

26
N NO OT TEE:: The Override pulse count feature (2-5) and the Channel three timed output (2-9)
have five possible settings each. Pressing will toggle through all the two-chirp settings.
6. Release the Override Switch.
Once a feature is programmed:
➤ ➤
Other features can be programmed within the same menu.
➤ ➤ Another menu can be selected.
➤ ➤ The learn routine can be exited if programming is complete.
To access another feature in the same menu:
1. Press and release the Override switch the number of times necessary to advance from the feature
you just programmed to the next one you want to program.
2. Then press the Override switch once more and hold it.
For example, if you just programmed the third feature in the menu and you would like to program the
seventh feature in the menu, you would press and release the Override switch four times and then press
it once more and hold it. The siren would chirp seven times to confirm access to the seventh feature.
To select another menu:
1. Press and hold the Override switch.
2. After three seconds, the unit will advance to the next menu and the siren will chirp, indicating
which menu has been accessed.
For instance, if you just programmed some features in Menu #1 (Basic Features) and you wish to pro-
gram a feature in Menu #2, you press and hold the Override switch. After three seconds, the siren
chirps twice indicating access to Menu #2.
To exit the learn routine do one of the following:
➤ ➤ Close the open door.
➤ ➤ Turn the ignition on.
➤ ➤ No activity for longer than 15 seconds.
➤ ➤
Press the Override switch too many times.