Clarion FZ709E, Owner'S Manual

Page: 8 / 40

12
English
FZ709E
Basic Operations
Title mode Indicator mode Clock
Example: iPod
Sound adjustments
You can adjust a sound effect or tone quality to
your preference.
∗
When CT data is not received, “ ” ap-
pears in the display for Title mode and Indicator
mode, while “ ” appears in the display for
Clock mode.
Setting the BEAT EQ
This unit is provided with 4 types of sound tone
effects stored in memory. Select the one you pre-
fer.
∗
The factory default setting is “ OFF ”.
3 - 1 .
Select “ BEAT EQ ”.
3 - 2 .
Touch [ ] key to enter detail setting stage.
3 - 3 .
During detail setting stage, each time your
slide along [ ] slider or touch [ ] / [ ]
key, the tone effect changes in the following
order:
“ OFF ” “ BASS BOOST ” “ IMPACT ”
“ EXCITE ” “ CUSTOM ”
OFF : No sound effect
BASS BOOST : Bass emphasized
IMPACT : Bass and treble emphasized
EXCITE : Bass and treble emphasized
mid emphasized
CUSTOM : User custom
1 . Touch the [ ] key to switch to ADJ menu.
2 . Select “ SOUND ” in the menu to enter
Sound Adjustment mode.
3 . Slide along the [ ] slider or touch [ ] /
[ ] key, the Sound Adjustment mode
changed as following order:
“ BEAT EQ ” (“ BASS ” “ MID ”
“ TREBLE ”)
∗ 1
“ BBE MP ”
∗ 2
“ BALANCE ” “ FADER ”
“ M-BEX ” “ HPF ” “ S-W LPF ”
“ S-W VOL ” “ BEAT EQ ”...
Notes:
∗
1
: BASS/MID/TREBLE are only available if
“ CUSTOM ” is selected in “ BEAT EQ ”.
∗
2
: BBE MP is only available if “
USB ” is
selected in source mode and the “ OUTPUT
FORM ” is set to “ DIGITAL ”. (Please refer to
page 30)
To change sound setting
Switching the display layout
1. Touch the [
] key for more than 1 second to
switch display layout.
2. Each time you touch the [
] key for more
than 1 second, the display layout switches in
the following order:
∗
Once selected, the preferred title display becomes
the display default. When a function adjustment
such as volume is made, the screen will momen-
tarily switch to that function’s display, then revert
back to the preferred title display several seconds
after the adjustment.
∗
If the key operation is performed with the screen
saver function on, the operation display corre-
sponding to the key operation is shown for about
30 seconds and the display returns to the screen
saver display. For details, refer to the subsection
“ Turning the screen saver function on or off ” in
section “ Common Operations ”.