Clarion FZ709E, Owner'S Manual

Page: 13 / 40

17
English
FZ709E
DX SEEK
When the [ ] key is touched, search will be per-
forming in the direction of higher frequencies.
When the [ ] key is touched, search will be per-
formed in the direction of lower frequencies.
∗
When seek tuning starts, “ DX SEEK ” appears in
the display.
Step tuning
Touch the [ ] / [ ] key to perform manual tun-
ing.
∗
If no operation is performed for more than 7 sec-
onds, manual tuning is cancelled and the display
returns to the previous mode.
Quick tuning
Touch and hold the [ ] / [ ] key for 1 second or
longer to begin station tuning.
Radio function
You need to enter the TUNER OPTION to per-
form the Radio function.
Manual tuning
There are 2 ways available:
Quick tuning and step tuning.
When you are in the step Tuning mode, the fre-
quency changes one step at a time. In the Quick
Tuning mode, you can quickly tune the desired
frequency.
1. Touch the [ ] key and select the desired band
(FM or AM).
∗
If is not lit in the display, touch and hold
the [ ] key for 1 second or longer. is lit
in the display and manual tuning is now avail-
able.
2. Tune into a station.
LOCAL SEEK
If the key is touched and held in position for 1
second or longer, local seek tuning will be en-
abled. Broadcast stations with good reception
sensitivity are selected.
∗
When local seeking starts, “ LO SEEK ” appears in
the display.
Radio Mode Operations
Preset memory function
Preset memory function can store up to 24 sta-
tions: Six stations for each of FM1, FM2, FM3,
and AM1.
TUNER OPTION
1 . During Tuner mode, touch the [ ] key to
switch to ADJ menu.
2 . Select “ OPTION ” in the menu to enter
Tuner Option mode.
3 . Slide along [ ] slider or touch [ ]/[ ]
key, the TUNER OPTION mode changed
as following order:
“ P.CH MEMORY ” (“ PTY ”
“ PTY SELECT ” “ AF ” “ REG ”)
“ LANGUAGE ” “ PRESET SCAN ”
“ AUTO STORE ” “ P.CH MEMORY ”...
Notes:
Items in bracket (PTY, PTY SELECT, AF, REG)
are called Radio Data System Adjustment
mode. Please refer to page 20 for Radio Data
System Adjustment mode.
“ PTY SELECT ” only available when “ PTY ” is
on.
“ REG ” only available when “ AF ” is on.
Manual memory function
3 - 1 .
Select “ P.CH MEMORY ”.
3 - 2 .
Touch [ ] key to enter detail setting stage.
3 - 3 .
Slide along [ ] slider or touch [ ]/[ ]
key to select the preset channel number to
be stored.
3 - 4 .
Touch [ ENT
] key for 2 seconds to store the
frequency into the selected preset channel.
3 - 5 .
“ MEMORY ” is displayed for 2 seconds before
revert to main display.